In todays instructional exercises section , I’ll illustrate how to compose track 1 and track 2 dumps with Stick nowadays (how to compose Dumps). For people who are as of now commonplace with track composing in CC dumps , I have too uncovered the steps to make track 1 from track 2. Some time recently we can proceed.
For the newbies here I know you might be befuddled almost what track implies. Tracks 1, 2, and 3 contain the data on the attractive stripe of a credit card dumps
Track 1 and Track 2 refer to the attractive stripe information found on credit, charge, and ATM cards. This information is encoded on the card’s attractive stripe and is utilized for preparing exchanges.
Track 1 vs. Track 2 Data:
1. Track 1 (ISO/IEC 7813 standard):
- Cardholder’s name, account number, expiration date, and other optional data.
- Format: %B[Primary Account Number]^Cardholder Name^Expiration Date + Benefit Code + Optional Data?
- Example: %B1234567890123456^DOE/JOHN^25051234567891234567?
Track 2:
- Simpler, holds numeric data only (account number, expiration date, service code).
- Used mostly by ATMs and payment terminals.
- Format: ;[Primary Account Number]=Expiration Date + Service Code + Discretionary Data?
- Example: ;1234567890123456=25051234567891234567?
Track 1 and track 2 store the bank logs counting account number, account title, bank title, etc. ATMs and POS utilize the points of interest in Tracks 1 and 2 to carry exchanges for cashing out or depositing.
Track 3 is an discretionary track for sparing extra data. In any case, beat systems such as Visa seldom utilize it to store client data.
I uncover what track 2 dump implies. It is the most imperative among the 3.
I will endeavor to break down the structure for you to understand.
514563446267380=12202040570004128900
514563446267380” are the digits some time recently the ‘equal sign’ (=) and they speak to the essential account number.
If you choose up a credit card or dumps points of interest related to the account with this track 2 dump, you would see that the numbers rehash themselves on the card.
For case, the Canister is the to begin with 6 digits of the essential account number. The to begin with 6 digits in my test track 2 is 514563.
For case, the Canister is the to begin with 6 digits of the essential account number. The to begin with 6 digits in my test track 2 is 514563.
The ‘equal sign’ (=) is as it were a separator. Presently, the to begin with 4 digits (1220) promptly after the ‘equal sign’ (=) speaks to the YYMM (Expiry Date or Expiry Month/Year). In this respect, 12 in December and 20 the year that closes with 20 (case 2020).
The another 3 digits (204) quickly after the expiry date is called the Benefit Code.
Now, know that the to begin with digits speak to the compatibility rules, the moment digits speak to the authorization preparing, and the third digits speak to the run of administrations. The remaining digits are optional information that you can still figure out.
Requirements to Write Track 1 and 2 Dumps With PIN
Underneath are the as it were necessities to type in the dumps with stick tracks with PIN:
EMV Program – EMV Peruser Author Tan ( EMV Software)
EMV stands for Europay, MasterCard, and Visa. It permits you to test the EMV contact and contactless keen cards and it employments an application called EMV.EXE and a testing script.
MCR200
MCR200 Machine permits you to compose tracks and examined the keen card.
Service Codes
You moreover require benefit codes beginning with 2 to write.
Smart Card
You moreover require a keen card, which is distinctive from a conventional credit card.
How to Type in Track 1 and 2 Dumps with PIN
In this segment, I unveil the steps to type in the track dumps with a PIN.
It is not troublesome, but you come up short to take after my lead.
Below are the steps to compose track 1 and track 2 dumps with Stick:
1 Launch the EMV.EXE
So, I expect you have introduced the program . Presently, run the emv.exe as admin and enter the permit key. The permit key is included in the .txt note record that comes with the software.
2.Connect MCR200 to Your Computer
After you total establishments, interface the MCR200 equipment to your computer and select equipment on the EMV Peruser Essayist Tan ( EMV Computer program), at that point got Connect.
3.Set Up EMV
After you interface the MCR200, a pop-up comes on. Note, select your card arrange and press Check USD Port.
Note, select either MasterCard, Visa, etc. Depending on your card type.
4 . Create ARQC, Ace Key, and CVV
Click the Create ARQC button in the EMV computer program for a set of interesting ARQC keys.
Next, press Produce Ace Key to produce a set of ace keys.
Finally, check the box that says Produce a Modern ICVV For Each Transaction.
5.Accept EPI MXI Credit Charge and ARPC Key
Now, acknowledge the EPI MXI credit charge and moreover acknowledge the ARPC Key.
6.Next Step
After you acknowledge the choices step over, utilize EMV Tag and ICVV.
Next, tap Check ARQC KEY and Check Ace Key.
7.Set Exp. Date and Enter PIN
In the taking after step, set the expiry date of the card counting the month and year as it were. You do not require the day since credit cards ask month and year of termination only.
If you have the Stick, enter it at this arrange. The Stick is not essential in spite of the fact that, but you cannot utilize the card on ATM if you do not know the Stick. So, without the Stick, you can utilize the card as it were for POS transactions.
I prescribe utilizing the card for POS as it were in spite of the fact that.
Enter Track 1 and Track 2
Now, enter track 1 and track 2. Note that track 2 will carry ‘D’ instep of the standard ‘equal sign’ (=). For example,
The contrast is that I have supplanted the ‘equal sign’ with D.
The reason I am changing the ‘equal sign’ (=) to D is since the EMV program runs in .hex arrange and not in .txt since both POS and ATM run in .hex.
8.Burn the Smart Card
After you enter the track, tap Substantial. The computer will show a pop-up with the data you have composed on the card.
If everything is affirm, press Burn Card. It ought to take around 2 minutes for the computer to burn the information onto the EMV chip of the card.
When the burning handle is total, tap Exit to exit the EMV program and evacuate the card.
Note: Do not evacuate the card without leaving first.
9.Confirm the Card Data
Before you closed down the EMV program, affirm whether the card data is correct.
Restart the program, interface your card to the MCR200, and tap Studied Card on the interface of the EMV program. Inside 1 diminutive, the EMV program will return the information on the card.
If everything is affirm, you may presently utilize the ATM or a POS to cash out. A POS is prescribed though.
How to make Track 1 from Track 2 Dumps
Some time recently you studied down to this arrange, I accept you came over the segment I clarified track 2 dumps.
Anyways, our dump information in this article is
Chase Bank (USA) credit platinum.
is our Track 2. Presently, I need to appear you how to make Track 1 from Track 2.
Bank Title » Chase Bank
Name of Card » John/Pat (to begin with and final name)
Bank Nation » USA
Credit or Charge » Credit (in the case of my card)
Card Sort » Platinum
These are the steps to make Track 1 from Track 2 dumps:
Write Out the Card Number
In the case of this instructional exercise, the card account number is 514563446267380 (the digits some time recently the ‘equal sign’ (=)).
Change the Rise to Sign
Since we are making Track 1 from Track 2, we have to alter the ‘equal sign’ (=) to B. You will presently have something like:
Add Cardholder Name
Next, include the title of the cardholder to the changed over Track utilizing a caret sign (^). You will presently have the following:
Add Benefit Code
The benefit code is the 3 digits instantly after the YYMM. In my case, the benefit code is 204.
When you include it, it ought to be something like:
After including the Benefit code, include the remaining codes. The remaining code may be around 10, but in my case, it is more than 10. My remaining code is 0570004128900.
So, when I include the remaining code after the benefit code, I have the following:
Add 6 Zeros
After including the remaining code (ordinarily 10), I include 6 zeros.
The Track 1 becomes
Note: My test does not work with the Amex card. It works on Visa and MasterCard.
⚠️ Imperative Note:
Handling or imitating genuine card information without appropriate authorization is unlawful and deceptive. It damages laws like the Installment Card Industry Information Security Standard (PCI DSS) and can lead to serious lawful results.
More Hacking Courses are coming soon in Urdu/Hindi Languages Soon as possible for now you can check out our website carding Methods Blackhat Pakistan and our YouTube channel Blackhat Pakistan. carding And Spamming full course in Urdu/Hindi
Also Checkout our website Grayhatempire.com for more tools. if you want to Download CraxsRat 7.4 Cracked then check here. For Requesting New Program Request us on Grayhatempire Telegram.
Also Don,t forget to Visit Blackhat Pakistan. Also Checkout Hap Crypter Cracked.